A wireless ad hoc network is a decentralized type of wireless network. The network is ad hoc because it does not rely on a pre existing infrastructure, such as routers in wired networks or access points in managed (infrastructure) wireless networks. The wireless networks are in great need today not only to for fire sharing but also for playing games using LAN network for example ( Counter Strike, NFSMW etc ).
NOTE: Before you begin, you should make sure that you’ve got a laptop or desktop with a wireless card that isn’t currently connected if your laptop is connected to the wired network, your wireless card should be free, and you can use it to allow access to the internet.
Create WiFi Hotspot In Windows Using Command Prompt
1. First, you need to open the command prompt with administrator privileges. Press the Windows + X key on your keyboard and select Command Prompt (Admin) from the pop-up menu.
2. Now we will create the hotspot. Simply enter the following command and press the Enter key:
netsh wlan set hostednetwork mode=allow ssid=techviral key=password
3. The SSID is the name of the WiFi connection and can be changed to anything you want. The KEY is the password and can be changed, also but bear in mind that it has to be at least eight characters.
4. Next you need to start the following command to start the WiFi hotspot:
netsh wlan start hostednetwork
5. Your WiFi hotspot should be activated and usable. You can check its status in the network and sharing center of your control panel.
6. You can now connect your devices to the hotspot and use the same WiFi connection without using third-party tools.
7. You can turn off the hotspot when not in use with the following command:
netsh wlan stop hostednetwork
So above is the method of create wifi hotspot method, by using these methods you would be able to create wifi hotspot in windows. And If you face any problem feel free to discuss in below comments, don’t forget to share with your friends.
0 comments: